Chó Low Poly – Whippet/Greyhound

REMIX: Credit to Tubbers (Listed as original author on Printables)

I made the base of the Whippet flat for printability. This model is scaled to 1350% of the original to fit the entire bed 220x220. I did not try printing the original before using tinker cad to flatten the base. It may have printed perfectly fine.

Printed on Creality K1

Nozzle: 0.4mm
Layer Height: 0.2mm
No Support: (Threshold of 30 degrees)
Weight: 123g
Infill: 15% (can go lower)
Print Time: 2 Hours 17 mins

Note: The STL is called Effy-G after one of the work dogs.