Hộp MTG Commander Deck Box

I've increased the size of the deck box by 5mm which allowed me to fit in a front section that can hold a sleeved Commander so it's easy to see which deck is inside and made some tweaks on the fit so the lid closes easier.

I've changed the magnets to 4x 3mm magnets too.

I've tried a bunch of different deck boxes for Commander decks and decided to make my own.

When I play MTG I usually use a Deck Holder to stop sleeved cards sliding around so I decided to make a deck box that works as both a Holder and a Box for storage and transport.

The lid rotates 270 degrees and the bottom is slight shorter than a sleeved card so it's easy to draw from the deck when it's on it's side.

For Assembly I used 4 M3x16mm screws to attach the hinge and 2 8mm Neodymium magnets to keep the lid closed. 

Everything is printed with organic supports and the hinge is printed on it's side to keep the round parts smoother.

I printed with PETG at 15% infill