Con lăn bôi keo (Glue roller, Leimroller)

With this glue roller it is easier to wet larger surfaces with glue, also it should be easy to clean the device after use (depends on the glue of course :-)

There are two versions, each with two different widths (46mm & 60mm)

To use the V2, you still need the following parts.

1x e.g. Mister Rui paint roller https://amzn.eu/d/5402iAJ

Please remove the foam from the roller and press the remaining plastic roller into the printed roller with force.

To use the V3, you still need the following parts.

1x e.g. Mister Rui paint roller https://amzn.eu/d/5402iAJ

Here you only have to pull off the handle, i.e. the original roller andsimply put on the printed roller. If necessary, remove the 6 retaining bars with a knife, but please do not injure :-)

Explanation of the file name

Leimroller_v2_d40_l46mm.stl ≙ Name_Version_Diameter_Length.file format

Have fun with it

if you want to keep me awake, feel free to buy me a coffee ;-) https://paypal.me/saiboTTech

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3 MMU 2

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: what you want, but my proposal is PETG or TPU
(THX to @AlexW for your picture under Makes and your hint)

Notes:

Please align on the print board so that the lettering faces upwards.

Category: Hand Tools