Skip to main content
F3D
Mount nhôm định hình cho webcam Logitech C920… 1

1 image

Máy In 3D

Mount nhôm định hình cho webcam Logitech C920 (C920 Extrusion Mount)

By SNIPERRAZER_3767502

Downloads
101
Likes
22
Views
550

Files 4 976.4 KB

  • C920_mount_-_2020_extrusion_1776532277.stlSTL · 349.1 KB
  • C920_mount_-_3030_extrusion_1776532278.stlSTL · 354.6 KB
  • C920_mount_-_2020_extrusion_1776532279.stepSTEP · 135 KB
  • C920_mount_-_3030_extrusion_1776532280.stepSTEP · 137.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a 2-piece mount for a Logitech C920 or C930 webcam, allowing it to mount to either 2020 or 3030 extrusion at the top of your printer. To use this mount, you will need to disassemble your webcam until the point where you remove the factory mount. Then, using pliers, gently pull the metal brackets (and their white plastic bushings) from the original mount. Insert the metal brackets and bushings into the printed parts, and reassemble the webcam.

Below is a great guide that covers webcam disassembly: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077

If you are mounting to 2020 extrusion, you will need:

  • 2x M3x8mm SHCS
  • 2x M3 T-nuts

If you are mounting to 3030 extrusion, you will need:

  • 2x M6x12mm SHCS
  • 2x M6 T-nuts

Disclaimer: I have not printed and installed the 2020 version (yet), but if you do, please let me know how it goes and if any changes need to be made!

Read more Show less

Print spec

Formats
stepstl
Model files
4
Total size
976.4 KB
Largest file
354.6 KB

0 comments

See all