Rồng Băng HueForge cho Bộ Màu Nước Polymaker

HueForge Ice Dragon created for the Polymaker Water Color Set. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments used Polymaker Water Color Set:

• Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3
• Polymaker PolyLite PLA Blue Transmission Distance: 1
• Polymaker PolyLite PLA Azure Blue Transmission Distance: 3
• Polymaker PolyLite PLA Aqua Blue Transmission Distance: 2.5
• Polymaker PolyLite PLA White Transmission Distance: 5

Swap Instructions:

• Start with PolyTerra Charcoal Black
• At layer #10 at (0.88mm) swap to PolyLite Blue
• At layer #13 (1.12mm) swap to PolyLite Azure Blue
• At layer #20 at (1.68mm) swap to PolyLite Aqua Blue
• At layer #30 at (2.48mm) swap to PolyLite White for the rest.