Iguana HueForge cho bộ filament Polymaker Green

HueForge Iguana created for the Polymaker Green Start Pack of Filaments. Only manual filament swaps required.

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm

Filaments used Polymaker Green Starter Pack:

• Polymaker PolyTerra Charcoal PLA Black Transmission Distance: 0.3
• Polymaker PolyLite Pro PLA Green Transmission Distance: 1
• Polymaker PolyLite Lime PLA Green Transmission Distance: 3.5
• Polymaker PolyLite PLA White Transmission Distance: 5

Swap Instructions:

• Start with PolyTerra Charcoal Black
• At layer #6 (0.84mm) swap to PolyLite Green
• At layer #9 (1.2mm) swap to PolyLite Lime Green
• At layer #12 (1.56mm) swap to PolyLite White for the rest.