Lansky Base – Đế cho hệ thống mài dao Lansky

If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal,  @paulorfo (Venmo), $paulorfo (Cash App)

--------------------------------------------

UPDATE | 11/16/2024:

"Lansky_Large Base.stl" file uploaded

This file has a larger base to prevent it from tipping when you insert the knife.

FILE NOT TESTED YET. Let me know if you test it.

--------------------------------------------

I bought a “Lansky Deluxe 5-Stone Sharpening System”, but unfortunately it does not come with a base, so you have to hold the clamp. The stand isn't mandatory, but helps a lot if you have one.

Before spending $20 buying the base, I decided to print and test my own.

I looked for some projects already made, but didn't like them. This was made as simple as possible. It can be clamped on a table or you can just hold it with your hands. You can also glue some rubber feet or any anti slip material.

There is a slot made to fit the arm and hold the clamp more stable, but if you don't like it, simply rotate the base as shown on the pictures.

Let me know if you have any suggestion for improvements.

Printing Settings:

• Layer: 0.3
• Wall: 2.0
• Top/Bottom: 2.0
• No Supports
• Brim: up to you

Characteristics:

• 80mm x 80mm x 69mm
• 32g
• Printing time: 1h54m

--------------------------------------------

If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal,  @paulorfo (Venmo), $paulorfo (Cash App)