
Ngàm gắn CR-TOUCH cho K1/K1 Max/K1C – Zero Y-Offset
Remix of Ngàm gắn CR-TOUCH cho K1, K1Max, K1C, K1SE, K1A By krllkn_1667609
- Downloads
- 172
- Likes
- 23
- Views
- 1,355
- Remixes
- 0
- Comments
- 0
Files 4 8.7 MB
- CR_nozzle_CR-TOUCH_v1_1776459993.stlSTL · 61 KB
- CR_nozzle_CR-TOUCH_v1_1776459994.stepSTEP · 576.5 KB
- CR_nozzle_CR-TOUCH_v2_1776459995.stlSTL · 72.6 KB
- CR_nozzle_CR-TOUCH_v2_1776459996.stepSTEP · 8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #306707
- Category
- Máy In 3D
- Published
Description
In version V2, the hole sizes have been optimized
Simple AF BlTouch - repository thanks to which this model was created
BOM:
2x - Heat Inserts M2.5*3*3.5
2x - Screws M2.5x5
2x - M3X10 (with hidden head)
klipper configuration
[bltouch]
sensor_pin: ^nozzle_mcu: PA9
control_pin: nozzle_mcu: PA8
pin_move_time: 0.500
x_offset: -37
y_offset: 0
speed: 10
lift_speed: 20
samples: 3
probe_with_touch_mode: true
samples_result: average
stow_on_each_sample: false
samples_tolerance: 0.1
samples_tolerance_retries: 5
sample_retract_dist: 3
# for k1c
[bed_mesh]
speed: 100
horizontal_move_z: 8
mesh_min: 3,5
mesh_max: 192,215
probe_count: 12,12
algorithm: bicubic
bicubic_tension: 0.1
# for k1c
[screws_tilt_adjust]
screw1: 63,24
screw1_name: front left
screw2: 229,24
screw2_name: front right
screw3: 229,193
screw3_name: rear right
screw4: 63,193
screw4_name: rear left
speed: 100
horizontal_move_z: 8
screw_thread: CW-M4
ABS material, print without supports
The cable routing looks like this, I used a standard cable from crtouch
Just in case, I am attaching the conclusions
Print spec
- Formats
- stepstl
- Model files
- 4
- Total size
- 8.7 MB
- Largest file
- 8 MB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-

-

-

-

-


