
Wallie(var) - Module tiền mặt (khay xu + kẹp tiền)
Remix of Wallie(var) - Ví thẻ Lever Action nâng cao By SMACKMAX
- Downloads
- 180
- Likes
- 70
- Views
- 2,120
- Remixes
- 0
- Comments
- 0
Files 9 1.9 MB
- magnet_cover4_1776435749.stlSTL · 10.4 KB
- magnet_cover2_1776435749.stlSTL · 10.4 KB
- money_clip_1776435750.stlSTL · 51.3 KB
- main_frame_1776435751.stlSTL · 162.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #305561
- Category
- Trang Phục - Phụ Kiện
- Published
Description
This module for storing cash and coins attaches to the back of the Wallie(var) with original screws and 5 M3 nuts.
It has dual hinges, each held together by an M3 screw (25mm or longer) and a nut. This provides increased strength compared to print in place hinges.
The lid is held shut by 12 6x2mm (same size as the ones for gridfinity) magnets, 6 on each side. These magnets have to be glued on the magnet covers first, and then the magnet cover has to be glued on the lid/frame.
The money clip has to be glued-on in between the two small printed marks on the lid. IMPORTANT: before gluing on the clip you have to cut those marks off, otherwise the lid won't close.
All materials needed for this build:
-7X M3 nuts
-2X M3x25mm or longer screws
-12X 6x2mm magnets
-Some form of adhesive (I used T-7000 glue for phone displays)
Print spec
- Formats
- f3dstepstl
- Model files
- 9
- Total size
- 1.9 MB
- Largest file
- 1,006.1 KB












