
Insert cho boardgame Scout - remix nhỏ (bỏ vách ngăn token số 1)
Remix of Khay đựng linh kiện trò chơi Scout - Phụ kiện in 3D tiện lợi By 3DGeekTech_4602363
- Downloads
- 207
- Likes
- 18
- Views
- 886
- Remixes
- 0
- Comments
- 0
Files 2 3.3 MB
- Scout_Game_insert_1776415030.3mf3MF · 507.2 KB
- Scout_Game_insert_0.2mm_PLA_MINI_2h6m_1776415031.gcodeGCODE · 2.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #304760
- Category
- Board Game
- Published
Description
Kudos to the original designer.
This is a minor remix removing the divider in the 1's tokens, as the tokens with our game were a bit thicker and didn't quite fit with the sloped divider.
I've included some g-code which can be used with Prusament PLA.
If you print without using the included gcode, I recommend setting your exterior wall width to 0.3mm. This lets your slicer deal with some of the thin divider walls, instead of it splitting up the walls with seams in the middle.
Alternatively, if you're using Prusaslicer with a 0.4mm nozzle, you could set the Advanced→Arachne perimeter generator→Minimum perimeter width=75%
If you're tired of the cardboard box your Scout game came in, check this out: https://www.printables.com/model/1086166-slide-n-lock-box-for-scout-game-insert
Print spec
- Formats
- 3mfgcode
- Model files
- 2
- Total size
- 3.3 MB
- Largest file
- 2.8 MB












