Bộ Chân Đế Sovol SV08 V4

One of the mods we are most proud of! 
this feet they are not just aesthetics they have multiple purpose 

• obviously a fabulous look
• risers for better ventilation of the electronic part
• they have the role of protecting the large pulleys from the Z Steppers
• having a larger contact surface also offers better stability

All in one with this simple design! 

Print settings:

Abs part:
5 walls
5 top
5 bottom
30% infill gyroid
0.2 layer height
Supports on!

Tpu part:
3 walls
5 top
5 bottom
15% infill
0.2 Layer height
Suport off
Ideal 90A or lower grade shore Tpu filament. 

BOM

8x M3 x 4.5OD x 4mm long heat set insert ( to secure the tpu part to the actual feet)
8x M3 x 6 mm ( to secure the tpu part to the actual feet)
4x M5 x 10 mm(you can use the original screws