
Vỏ Đồng Hồ Nixie, mẫu IN-12
- Downloads
- 124
- Likes
- 21
- Views
- 914
- Remixes
- 0
- Comments
- 0
Files 3 6.9 MB
- nixie_clock_body_v1_1776392601.stlSTL · 5.4 MB
- nixie_clock_cover_v1_1776392603.stlSTL · 391.1 KB
- nixie_clock_cover_grid_v1_1776392604.stlSTL · 1.2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #304224
- Category
- DIY
- Published
Description
I needed some kind of enclosure for a nixie clock (PCB and its gas lamps). Sometimes, one could easily get a 300V hit, which is not deadly due to super low power of the device, but still unpleasant. And although gas lamps have a nice warm glow, at night they would shine just too bright, so I had to take that in to account. I wanted something retro looking, like an old military devices, or an old gas lamp radio.
How much I succeeded in capturing the look is for you to decide.
The PCB's already came with some nuts and bolts, so I just used those for the assembly. Otherwise, the openings on the front cover are 2.5mm, and the accepting parts on the case are 2mm in diameter. I used are 2x8mm phillips bolts.
On the side of the case there are 3 openings, one for the UBS cable, other two for the clock adjustments.
Printables:
- Case: I used ASA, just because I had it in the printer. Otherwise I believe the model could be printed with any desired filament. No special setting. Just some supports for the overhangs.
- Cover(s): 2 covers, a mesh and a solid one for more stealthy look
Non-printeables:
- a simple cheap nixie clock PCB, from Ali and alike
- IN-12a nixie tubes
- regular 5V output wall charger
AliExpress link to the PCB used:
https://www.aliexpress.com/item/1005002287761858.html?spm=a2g0o.productlist.main.9.3a0ejY61jY61TS&algo_pvid=9c3e1c88-7b42-4111-a18c-662df46e6b84&algo_exp_id=9c3e1c88-7b42-4111-a18c-662df46e6b84-4&pdp_npi=4%40dis%21CHF%2120.63%2116.50%21%21%2122.54%2118.03%21%402101c5a717181776534861104ed9e1%2112000019924031071%21sea%21CH%212037906509%21&curPageLogUid=0K4TdmY00pKr&utparam-url=scene%3Asearch%7Cquery_from%3A
Print spec
- Formats
- stl
- Model files
- 3
- Total size
- 6.9 MB
- Largest file
- 5.4 MB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-
New

