Dải phân cách dạng module cho đường đua Carrera Hybrid

Compatible side barrier for the Carrera Hybrid track, consisting of four parts:

• a left end piece,
• a right end piece,
• a middle section, and
• a connector.

The middle section can be modularly connected as many times as desired to extend or shorten the barrier. For this purpose, a printable connector is used, which I have included in two tolerance options. Two of these middle sections correspond to the length of a curve track piece from the Carrera Hybrid Starter Set.

Please note that when printing the middle section and the two end pieces, support structures may be required for the connector part (depending on your printer). The rest can be printed without supports.

Before printing, ensure that your printer is well-calibrated!
You can find calibration guides for your specific printer online, through AI tools, or on YouTube.

If something doesn’t fit because your printer is still not precise enough, adjustments can be made with sandpaper or similar tools.

For a 100% printable bridge look my other design here:

https://cults3d.com/de/modell-3d/spiel/bruecke-carrera-hybrid-kompatibel-beta