Đế nâng máy Qidi Q1 Pro (Bọc TPU)

The Qidi Q1 Pro is a large machine and takes up my entire desk space.  I needed somewhere to store tools by the machine, so just thought to print some simple taller feet to create space underneath.  However, the factory feet are not easy to remove (appear to have a retaining nut hidden under the base tray of the machine) and I just could not get them off from the outside.  So decided to print TPU sleeves that fit over the existing feet and raise the machine by about 20mm from stock, creating a gap of about 28mm under the machine for a tool tray or similar.

Printed in black Ziro TPU, walls x5, adaptive cubic infill 60% (with a modifier down central core at 100% infill).

Each uses 35m of filament and weighs about 110g.  The Q1 Pro is a very heavy machine and these chunky feet should easily take that weight and also provide some damping.  They seem to work well and have not adversely impacted the input shaping values or print quality at all.

Pre foot sleeve fitment:

[input_shaper]
## shaper_type_x = mzv
## shaper_freq_x = 52.0
## shaper_type_y = mzv
## shaper_freq_y = 43.0

Post foot sleeve fitment:

[input_shaper]
## shaper_type_x = mzv
## shaper_freq_x = 52.8
## shaper_type_y = mzv
## shaper_freq_y = 43.0

Edit: after printing these I found that user Redshark has also noted the factory feet cannot be removed and produced some similar but lighter items,… so if you prefer to use less filament:-

Qidi Q1 pro feets by RedShark | Download free STL model | Printables.com