Ván trượt Telemark cho DUMMY 13 (v1.0 & BETA)

Stumbling over @maxi_1408247's ski set pushed me to print it, and a DUMMY 13. When I showed it to a friend that's into Telemark, the immediate response was that a Telemark variant was needed. Since DUMMY 13's original foot already has an articulated toe part, I thought it wouldn't be to hard to do, and had suddenly utterly nerd-sniped myself, so I just had to make it.

Works well for Telemark, cross-country skiing and ski jumping poses (with a stand), but can also be used for normal alpine skiing poses.

I recommend printing in PETG, with the same recommended settings as the original DUMMY 13 model (0.15mm layer height, 20% rectilinear infill, external perimeters first or single perimeter on first layer, etc.). If you want a color change, I recommend the 2.45mm layer (as shown in the photos) and/or the 3.35mm layer.

Changelog

• 2024-06-09
  • Uploaded ski in STL format due to request. The ski poles are available in STL format in @maxi_1408247's original model.
• 2024-12-08
  • Added new files for (and based on) DUMMY 13 v1.0 (the old files, based on the DUMMY 13 Beta files, are still available).