Skip to main content
F3D
Nắp thay thế cho máy xay cà phê Timemore Chestnut C2 và C3 1

1 image

Đồ Gia Dụng

Nắp thay thế cho máy xay cà phê Timemore Chestnut C2 và C3

By 3dprintathom_1430824

Downloads
407
Likes
17
Views
1,918

Files 4 2 MB

  • Chestnut-C2-C3_lid_46mm_1776348214.stlSTL · 550 KB
  • Chestnut-C2-C3_lid_flat_46.8mm_1776348216.stlSTL · 461.3 KB
  • Chestnut-C2-C3_lid_46.8mm_1776348217.stlSTL · 539.9 KB
  • Chestnut-C2-C3_lid_flat_46mm_1776348219.stlSTL · 462 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a replacement lid for Timemore's Chestnut C2/C3 coffee grinder as the original has a tendency to break after some time.  I recommend one of the 46mm variants in order to minimize the amount of microplastic in your coffee. The remaining gap of 0.5 mm is barely noticeable anyway, though I won't stand between you and 46.8 mm variants if the perspective of a visible gap drives you up the wall.

The non-flat variant was designed to be as close as possible to the original one. I only added a rounded conical profiling of the mounting hole (invisible after the installation) and increased the number of cutaways on a “chuck” from 3 to 5 in order to avoid breakage during the assembly process.

Repair instruction

The crank cannot be unscrewed! The parts are joined by a rivet. Just break away the (already broken) lid and press-fit the new one. The tolerance is just right assuming that you account for material shrinkage in your slicer of choice (I've designed this part with 0.1 mm of tolerance). Press on the lid from opposite sides at the same time otherwise it can break when moving through the  flange on the shaft.

For support-free FDM printing use the flat type.

For tight fit use 46.8 mm version.

Suggested material: PETG (for abrasion resistance) 

Suggested infill: 30%

  • 2D Honeycomb for a more stiff variant;
  • Gyroid for a more flexible variant (decrease the amount of top layers to 2 and bottom layers to 3).

Print on the flat side.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
2 MB
Largest file
550 KB

0 comments

See all