Giá đỡ đồng hồ đo nhiệt độ/độ ẩm dạng tròn

Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly

Print Settings:

Layer Height: smaller is better, i recommend 0.15 for 0.4 and 0.2 for 0.6 nozzles

Extrusion Width: use same as nozzle diameter, 0.6 for 0.6mm nozzle 0.4 for 0.4mm nozzle

Perimeters: 2 for 0.6 width, 3 for 0.4 width

Infill: higher infill means the base will be heavier, 30% gyroid worked well

Material: i used ABS+, but any hard plastic will work (PLA, PETG, ABS, etc)