
Ống Đựng Playmat TCG
- Downloads
- 1,154
- Likes
- 128
- Views
- 3,314
- Remixes
- 0
- Comments
- 0
Files 4 251.4 KB
- playmat_tube_inner_1776306891.stlSTL · 81.7 KB
- playmat_tube_outer_1776306891.stlSTL · 87.8 KB
- playmat_tube_1776306892.3mf3MF · 76.2 KB
- basic_tube_1776306893.scadSCAD · 5.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #301349
- Category
- Đồ Chơi Khác
- Published
Description
This storage tube fits standard neoprene-backed fabric playmats 610x350mm (approx 24x14") such as those sold by UltraPro, Ultimate Guard, GameGenic, and others.
The two halves are identical apart from the latch section.
Printing Notes
- The provided STLs require a 0.8mm wall width. This is achievable on a 0.4mm nozzle but YMMV.
- This is a vase mode print.
- I've used PLA for my prints, but other materials should work well too.
- The 3mf project file includes the settings I use to print these on my Bambulab P1S
Customizing
I've included the playmat_tube.scad source file to aid in producing customized versions of this model. You'll need a development snapshot build of OpenSCAD as the most recent ‘stable’ version is from 2021. I use 2024.04.08 but the most recent development snapshot from here should be fine: https://openscad.org/downloads.html#snapshots
All the variables for resizing the tube are available in the customizer panel. The most basic are height and major_radius which change the overall height and thickness of the tube respectively. Increasing sections will add a middle section, letting you achieve the same final length with a smaller print volume. You can change the wall thickness too, but i don't recommend going lower than the default 0.8mm as, for PLA at least, it results in a flimsy final product.
Related Models of Mine
Print spec
- Formats
- 3mfscadstl
- Model files
- 4
- Total size
- 251.4 KB
- Largest file
- 87.8 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-

-

-

-

-


