
Ngàm gắn Camera cho dòng MK Family & MINI | Buddy3D
- Downloads
- 1,850
- Likes
- 308
- Views
- 9,417
- Remixes
- 2
- Comments
- 0
Files 6 5.3 MB
- MK_MINI_Mount_1776295497.3mf3MF · 532.5 KB
- MK_MINI_base_1776295497.stlSTL · 2.2 MB
- MK_MINI_Twist_lock_1776295498.stlSTL · 337.2 KB
- MK_MINI_ENC_mount_1776295500.3mf3MF · 428.7 KB
Make a variant with AI
Build another version of this model.
Remix versions 2
Ngàm gắn Camera Buddy3d cho tủ in Prusa MK3 và MK4 Printer-BoxBybrett · 05/13/2026
Ngàm gắn Camera Buddy3D cho Enclosure Prusa XL / MK4SByvitalij_90303 · 04/16/2026
Details
- Model ID
- #301022
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
This Buddy3D Camera mount is compatible with MK Family and MINI standalone printers including MK Family and MINI in the enclosure.
Please note that magnets for using the camera mount in MK & MINI enclosure are recommended. Magnets prevent accidental camera movement due to vibration while using the printer, the recommended position is in the top front left corner in order to achieve clean image without affecting the LED strip.
recommended magnet size : 20x6x2mm - Neodymium magnet (4 Pcs).
You can find them on our eshop.
Recommended settings:
Default 0,2mm layer height profile, PETG filament, supports are not needed.
How to guide
Installation:
- For MK_MINI_Mount please prepare
- MK_MINI_base (1 pc)
- MK_MINI_Twist_lock (1 pc)
- Screw M3x10
- For MK_MINI_Enclosure Mount please prepare
- MK_MINI_ENC_base (1 pc)
- MK_MINI_Twist_lock (1 pc)
- Screw M3x10
-
**Info:**The rest of the guide is the same for the both versions -
Remove the build-in support structure from MK_MINI_Twist_lock.
-
Connect the two plastic parts and screw the M3x10 screw into it.
- Twist and lock the camera into the mount
- Step 1
- Step 2
- Step 3
Print spec
- Formats
- 3mfstl
- Model files
- 6
- Total size
- 5.3 MB
- Largest file
- 2.2 MB
0 comments
You may also like 12 models
See all-

-
New -
New -

-
New -

-

-

-

-

-

-


