Buttcap cho vợt Tennis dòng Head (Size 0-6)

Tennis Racquets have a buttcap (butt cap) placed over the pallets on the handle of the racquet. This is modeled after the buttcap from a Head Boom MP. You can also resize the model in Onshape which has a free license available (anything you do with free license is publicly accessible). Link below. 

Here is the configuration table I use for the different grip sizes in OnShape:

#palletdiagface #palletwidth #palletheight
Name Value Value Value
Default 11.3 33.6 27.2
Grip 0 9.5 27.6 24.6
Grip 1 10.4 31 25.2
Grip 2 10.6 31.6 26
Grip 3 11.1 32.6 26.4
Grip 4 11.3 33.6 27.2
Grip 5 11.7 34.9 28.2
Grip 6 12 35.2 28.4

https://cad.onshape.com/documents/d11e51f13873c3eeba85771e/w/84ae6da75292977bf9454749/e/25f7890814b27cc45e42f99e?configuration=List_k4lgZlaeyVxGDR%3DGrip_6&renderMode=0&rightPanel=configPanel&uiState=6761cb24386ac01617c8b1f4

*Important note. When printing I recommend you do not orient the print with the base of the buttcap on the plate. When playing tennis there is a lot of twisting force on the butt cap, which can cause layers to separate if they are oriented parallel to the base.