Bộ Ngàm Chuyển Đổi Flight Controller [Trọn bộ]

All-in-one Flight Controller/ESC Adapter Mount

Changelog:

• [13/05/2024] Higher hole tolerance for poorly-sliced/poorly-performing printers
• [13/05/2024] Thickness increased to 2mm
• [15/05/2024] "Hybrid" version added - 30*30mm (M3); 20*20mm and 25.5*25.5mm (M2)
• [15/05/2024] Added “20mm_to_25mm_adapter_mount” and “20mm_to_25mm_adapter_mount”
• [25/05/2024] Added “20mm_to_25mm_to_30mm_adapter_mount[Hybrid](3mm_feet)”, “20mm_to_25mm_adapter_mount(3mm_feet)”, “25mm_to_30mm_adapter_mount(3mm_feet)”, "16mm_to_20mm_adapter_mount" and “16mm_to_20mm_adapter_mount(3mm_feet)”

Features:

• Supported sizes - 30mm, 25mm, 20mm.
• Mounting hole size - M3 (⌀3.15mm); M2 (⌀2.15mm)
• Stiffness: 100% Infill for better stiffness

Print Settings

• Printer: Creality Ender 3
• Filament material: PLA
• Layer height: Default or fine
• Wall Ordering: Outside to Inside
• Supports: Yes
• Infill: 20%
• Infill Pattern: Hexagonal/Tri-Hexagonal
• Nozzle Temp: 220°C
• Bed Temp: 60°C
• Print Speed: 100mm/s
• Rafts: Doesn't Matter
• Notes: 100% Infill with Hexagonal/Tri-Hexagonal Pattern for better stiffness