Pháo hoa ban đêm - Mô hình lithophane đôi Hueforge

Fireworks at Night - Dual Lithophane Hueforge Print

This print is a really, really cool dual lithophane piece. If you put a backlight behind it, or hold it up against a light, it will shine through the fireworks as if the print is coming to life.

Video here: https://imgur.com/7386cnX

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA META Sunlu White Transmission Distance: 9.6
• PLA Overture Cream (orange) Transmission Distance: 8.4
• PLA META Sunlu Red Transmission Distance: 4
• PLA+ Overture Dark Blue Transmission Distance: 1.8
• PLA META Sunlu White Transmission Distance: 9.6
• PLA Siddament Black Transmission Distance: 0.2

Swap Instructions:

• Start with White
• At layer #20 (0.96mm) swap to Cream (Orange)
• At layer #31 (1.4mm) swap to Red
• At layer #42 (1.84mm) swap to Dark Blue
• At layer #48 (2.08mm) swap to White
• At layer #49 (2.12mm) swap to Black for the rest.