Skip to main content
F3D
Cây thông Noel dạng dải ruy-băng chân thực 1

2 images

Sự Kiện - Lễ Hội

Cây thông Noel dạng dải ruy-băng chân thực

Remix of Cây Thông Noel 3D By DrJones

By Woeggil_4190747

Downloads
213
Likes
46
Views
1,016

Files 10 5.3 MB

  • rribbon_tree_1776235869.stlSTL · 4.8 MB
  • rribbon_spring_1.1_1776235871.stlSTL · 371.5 KB
  • rribbon_star_1776235871.stlSTL · 4.8 KB
  • rribbon_star_s_var1_1776235872.stlSTL · 4.2 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a mashup between DrJones's design "christmas tree" and my design "Ribbon Christmas tree".

While the original model weighed only 20g this one weighs about 80g; 
the spring and the star are compatible between the two models.

I recommend printing all the pieces without supports (the STL files already contain the correct positioning of the pieces to avoid supports).

STAR VARIANTS

INSTRUCTIONS 🧰

MY SETTINGS

Nozzle : 0,4 mm
Layer height: 0,2 mm
walls: 3
top/bottom solid layer: 6
infill type: rectilinear
infill density: 15%(tree), 20%(the rest)
NO supports
NO vase mode

ASSEMBLY

  1. Stretch the spring a bit so that you can work with it better;
  2. insert the lower end of the spring into the first hole at the base of the tree, as shown in the photo;
  3. insert the lower end of the spring into the second hole at the base of the tree;
  4. insert the tip of the tree into the hole at the top of the spring;
  5. place the star on top of the spring;
  6. enjoy! 🎄

Read more Show less

Print spec

Formats
stlzip
Model files
10
Total size
5.3 MB
Largest file
4.8 MB

0 comments

See all