Skip to main content
F3D
Pillenspender - Hộp đựng thuốc thông minh V2 1

7 images

Đồ Gia Dụng

Pillenspender - Hộp đựng thuốc thông minh V2

By Findusdwarf_141404

Downloads
182
Likes
19
Views
1,489

Files 5 5.6 MB

  • Pillendose_20x30x136_Unterteil_1776233574.stlSTL · 2.9 MB
  • Pillendose_30x30x136_Unterteil_1776233575.stlSTL · 869.8 KB
  • Pillendose_40x30x136_Unterteil_1776233576.stlSTL · 869.8 KB
  • Pillendose_20x30x20_Deckel_Tansp_1776233577.stlSTL · 600.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

December 23, 2022

This is a remix of my own pilldispenser https://www.thingiverse.com/thing:5720588

The basic part is the same as the original pill box, without modification.

I redesigned the lids to print with transparent PLA.

Transparent filament doesn't make transparent parts, unfortunately, but if they are thin enough they are at least somewhat translucent.

I put a kind of window in the lid, with 0.4mm thickness. There you can at least see if the corresponding box is empty.

In addition, each lid has a slot in which you can insert a small piece of paper (10x17mm) on the side for labelling. This is then also readable through the transparent material.

As with the original box, a piece of 1.75mm thick filament serves as a hinge, which is melted 3-4mm at both ends.

December 23, 2024: 
I have added the base part in the heights 30mm and 40mm. The lids fit to all base parts.
You can find the parasolid models in the zip-file "Pillendose Parasolid.zip"

Supports: No

Resolution: 0,20mm

Infill: 40%

Filament: PLA, transparent for the lid

Read more Show less

Print spec

Formats
stlzip
Model files
5
Total size
5.6 MB
Largest file
2.9 MB

0 comments

See all