
Bộ ốp hông lưới cho Voron Trident 250
Remix of Skirt quạt giữa Voron 2.4r2 / Trident đã chỉnh sửa By DanielH_343108
- Downloads
- 107
- Likes
- 17
- Views
- 931
- Remixes
- 0
- Comments
- 0
Files 9 6.2 MB
- front_skirt_a_250_1776231792.stepSTEP · 932.8 KB
- front_skirt_b_250_1776231794.stepSTEP · 925.2 KB
- keystone_panel_1776231794.stepSTEP · 535.4 KB
- power_inlet_adamstech_1776231795.stepSTEP · 557 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #300084
- Category
- Máy In 3D
- Published
- License
- GNU General Public License v3.0
Description
Use these files in SuperSlicer to generate two-color meshed skirts. The mesh object is 1.6mm high, so add a PAUSE in your gcode to switch colors at 1.8mm layer height. All parts are oriented flat for printing and easy importing into SuperSlicer. (note: make sure preferred orientation is set to 0, not 45, otherwise the skirt and the infill won't import lined up)
Recommended SuperSlicer settings:
Note: If you're going inverted electronics, you might want to remove the mesh from one of the hexagons so you can stick a finger through to lift up the deck panel (otherwise you'll need to come up with another solution to attach a handle to the deck panel).
Watch this video from Steve Builds for a walkthrough on how to make these
If you like this model and want to give back, please consider buying me a coffee.
Print spec
- Formats
- step
- Model files
- 9
- Total size
- 6.2 MB
- Largest file
- 967.6 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -

-
New -

-

-

-

