Pocket Knuckle Bones Game - Bộ Trò Chơi Knuckle Bones Bỏ Túi

-This is a pocket version of the mini game Knuckle Bones from Cult of the Lamb.

-You will need at least 17 D6 of 12mm max., you can fit a total of 18 dices.

-Print ant 0.2 and whatever infill you want, no supports or anything like that needed.

-I recomend using Ironing for a better finish.

-I've used PLA 850.

-When imported into the slicer, select all the bodies and assemble or group them so its easier to move around and print it all assembled.

-You can eliminate the latches and print the file named “Anclaje Indep.” 4 times so you can print them separately, this is so the model can fit in smaller print beds.

-The gcode I've added is meant for a X1 Carbon with the AMS to print it in two colors, red and black, as in the photos.

Have fun!!!

Edit (13/10/2024): Added the V15, the only difference is that's a tad smaller, around 6mm less in the X and Y axis. Nothing too fancy but I just wanted to make the holes a little smaller, but still fitting the 12mm dice.