Đèn lồng Minecraft cho đèn pin cầm tay

Remodeled the Lantern without Supports to fit these lights https://www.amazon.de/dp/B08JHQ1931?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1.

I also corrected the recesses for the panes and provided the holes for the pins in the lid with a tolerance.

Around the base with which you can remove the lamp is held in place with a magnets.

I added pockets in the model for these magnets.

You have to add a pause command at 5.2mm in the G-Code to insert the magnets.

I used magnets 3x10 mm like these https://www.amazon.de/gp/product/B08JB2YPX3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1.

• 2.1.2025:
  • I noticed that the distance between the magnets is too big at just under 4mm and the magnets are no longer strong enough to hold the floor.
    Therefore, I modeled the files so that the distance is only 1mm, but now the pockets for the magnets on the models are no longer at the same height and if you print everything on one plate you need two breaks.
  • Added the window panes