
Dummy Thicc 13 - Phụ kiện "siêu vòng ba" độc đáo
- Downloads
- 244
- Likes
- 47
- Views
- 2,807
- Remixes
- 0
- Comments
- 0
Files 2 182.9 KB
- dummythicc13_1776115846.3mf3MF · 66.8 KB
- dummythicc13_1776115847.stlSTL · 116.1 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #298445
- Category
- Đồ Chơi Ngoài Trời
- Published
- License
- Creative Commons — Attribution
Description
Before anybody says anything in the comments, I will NOT apologize for art.
So I was playing with my Dummy 13 when I had a horrible thought…Dummy Thicc 13
Thus, I made a butt for the Dummy 13. The only reason this took me longer than an hour is because it was my first time using TinkerCAD, I literally just made a butt shape and stuck it onto the stand attachment.
Some caveats:
- As previously implied, this is my first time making any sort of model for 3D printing. I almost certainly did something wrong. If you have any suggestions for improvement, I'm open to them!
- I don't think I can get the butt attachment off without some sort of tool.
- The creator of Dummy 13 said ASA was the best material for the structure. Since I don't have any ASA, I printed and sliced mine in PETG-HF. I did this because the stand attachment was included as one of the structure pieces, so you should probably not print this piece in PLA.
- I have put this under the same CC attribution license as Dummy 13. Nobody else needs to take the blame for this. You can totally sell it if you want, though.
- I know the red PETG in the pictures makes my Dummy 13 look like a baboon. I only had red and translucent blue PETG on hand, and nobody likes translucent butts (unless you're into ghosts, I guess).
- The butt goes into the stand hole. This means you can't attach the stand to the model. I suppose there may be ways around that, but they're too terrible to think about.
- This model was originally tested/printed on a Bambu Labs P1S. The 3MS file included was sliced in Bambu Studio using Bambu Labs PETG-HF. I have no idea how other printers/slicers/filaments will deal with this, and you may have better luck just using the STL.
- This is butt only. If you want the rest of it, you'll have to go to the Dummy 13 page.
- Dummy 13 was created by Lucky 13 Toys.
Happy printing!
NB: This model was originally posted to Maker World, then cross posted to Thingiverse, Cults 3D, and Printables.
Category: Toy & Game Accessories
Print spec
- Formats
- 3mfstl
- Model files
- 2
- Total size
- 182.9 KB
- Largest file
- 116.1 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-
New -

-

-

-

-


