Vỏ Case Tùy Chỉnh Cho Raspberry Pi 5
- Downloads
- 184
- Likes
- 31
- Views
- 1,442
- Remixes
- 0
- Comments
- 0
Files 4 4.6 MB
- Raspberry_Pi_5_top_case_1776102400.3mf3MF · 426.6 KB
- Raspberry_Pi_5_buttom_case_1776102401.3mf3MF · 461.1 KB
- Raspberry_Pi_5_Top_case_1776102402.stlSTL · 1.8 MB
- Raspberry_Pi_5_Bottom_case_1776102403.stlSTL · 2 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #298320
- Category
- Dụng Cụ Tiện Ích
- Published
Description
The printer that i have used is the Anycubic Kobar 2 Neo
good and affordable printer with lots of features, this print came out pretty well expect for that exhaust that is given in the design you can remove it after the print if the design is not needed.
The setting that i have used is from the Anycubic Slicer itself, but the setting could be the same in most of the slicer softwares.
the bottom case has a tight fit for the Raspberry Pi 5, so be careful while placing it.
current design doesn't have the holes or gaps required for the GPIO pins from the Raspberry Pi 5, since this one i have used it for my Tv for using Multiple OS operations.
There's direct airflow to the Active cooler fan intake so more efficient in cooling.
I HAVE USED M2X8 4PCS SCREWS AND NO NUTS REQUIRED.
(copyright : Logo from - Raspberry Pi Foundation )
Print spec
- Formats
- 3mfstl
- Model files
- 4
- Total size
- 4.6 MB
- Largest file
- 2 MB