Compact Mixbox Style Controller (Tay cầm chơi game nhỏ gọn)

This is a Mix-box style controller I designed in fusion 360, the outer "shell.stl" and “key frame.stl” are purely for aesthetics and do not need to be printed although you would need to accommodate with a shorter screw for the shell. This design uses a Raspberry Pi Pico as well as GP2040 Firmware. The mechanical switch mounts as well as key-caps are not my design and are linked and credited below. Thank you for checking it out, this was a blast to make!

Parts list:

1 x Raspberry Pi Pico
1 x USB-C Breakout Board
4 x Threaded Inserts
4 x M5 Screws
12 x Gateron Mechanical Switches
5 x Momentary Tactile Push Button

3D Printed Key-caps and Housing:

All credits to Rana Labs
8 x Housing (bottom and top)
8 x Circular Key-caps