SnapLock Conduit Clips – In Dẹt, Gấp & Gắn!

🔌 SnapLock Conduit Clips – Flat Print, Fold & Fit! (EN Standard, Ø20-63mm) 🔌

---

💡 Why These Clips?

• 📏 EN Standard Compliant: Designed for rigid electrical conduits (Ø20 to Ø63mm), meeting European standards.

• 🖨 Flat Print, No Supports: Print both parts flat—no supports needed! Fold and snap together.

• 🔩 Tool-Free Installation: Insert into a drilled hole, clip the conduit, and it’s locked in place. No screws, no tools!

• 📊 Side Markings: Clear indicators for drill bit size and compatible conduit diameter. No guesswork!

• 💪 Recommended Materials: PLA (indoor use) or PETG (enhanced durability, outdoor use).

---

🛠 How It Works

1. Print : Ø0,4 nozzle, 0,2 layer height, tested with PETG**.**

2. Fold the parts together to form the clip.

3. Insert the clip into a drilled hole in concrete (diameter marked on the clip).

4. Snap your electrical conduit into place. Locked and secure!

---

💡 Pro Tip

"No need to drill larger, the grip is already oversized. Exception if your concrete is friable"

---

⚠ Note

• Designed for rigid conduits (EN standard).

• No glue, no screws: Everything stays in place by design!

---

🚀 Ready to revolutionize your electrical installations?
Download, print, and say goodbye to failing cable ties!

---

⚠ Disclaimer

These 3D-printed conduit clips are provided as a DIY solution for non-critical applications.

• No structural or load-bearing tests have been conducted on these parts.

• Not certified for use in critical installations where failure could endanger people or property.

• For professional or high-risk environments, always use certified fixings and consult a qualified electrician or engineer.

• The designer (8art5) cannot be held liable for any damage, injury, or loss resulting from the use or misuse of these clips.

Use at your own risk. When in doubt, prioritize safety and compliance with local regulations.