Trụ Gắn Multiboard và Các Phụ Kiện Đi Kèm

A solution for mounting electronics on Multiboards. 

A screw-in post for multiboard's large holes gives the basic mount-point.  Accessories provide means to mount things like hard-drives, modems, and a base for RaspberryPi.

Pi case is assembled with m2.6 x 6mm screws. Get the top from here.

Box Mounts use Hook&Loop strips like this. Cut to length, and thicken one end with thread or staples.  I used crazy glue. Put a bead along the end of the strip, dip in baking soda, and it will harden immediately. Repeat until thick enough (usually twice is enough).