Skip to main content
F3D
Hộp tổ chim cắt Kestrel (Kích thước lớn) 1

3 images

Thế Giới - Mẫu Scan 3D

Hộp tổ chim cắt Kestrel (Kích thước lớn)

By chanik_2597536

Views
68

Files 4 5.5 MB

  • tophalf_1775917636.stlSTL · 2.5 MB
  • bottomhalf_1775917638.stlSTL · 2.1 MB
  • cover_1775917639.stlSTL · 366 KB
  • flagpole_adaptor_1775917640.stlSTL · 590.7 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Designed to comply with recommended specs and features of wood bird box plans from:

Kentucky Fish and Wildlife

Maryland Dept. of Natural Resources

Ohio bird sanctuary

Print details: Designed to just fit in a Prusa core 1. I tried printing this is ASA for maximum UV resilience but had too much trouble with warping since the size is huge so switched to PCTG which is almost as good with UV and gave me no warping issues. Needs two 1kg spools of filament.  I do recommend also apply a coat of Krylon Fusion All-In-One Adhesive Spray Paint or similar to better seal and UV protect. White is recommended to keep baby birds from baking during summer heat. Add 2-3" of wood shavings in bottom.

Features: Ample drainage holes, internal ladder for fledglings. Flush rain keep-out vent holes. Two halves mate with 4 #6 screws.

Installation points: Designed to be attached with 2" EMT 2-hole strap but can be attached with cable ties to flagpole as I have done or screwed into a surface of course. Use two 10ft 2" EMT or a flagpole kit to get box at least 15ft high (25ft is better). Opening should face South, SE. Do NOT add perch. Kestrels don't need one and invites other birds that do which can predate eggs or chicks. YRMV: your raptor may vary. This box is also ideal size for screech owls so FCFS. If printed at 50% scale is then right size and opening for blue jays or other mid-size birds.  Only put up one box.  Kestrel boxes should be at least 1km away from each other.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
5.5 MB
Largest file
2.5 MB

0 comments

See all