
Grip Body for Charm - Phần tay cầm gắn charm cho Nerf Blaster
Remix of Alchemist - Súng Phun Bơm Hành Động (Tự Chế Nerf) By Sillybutts
- Downloads
- 1
- Likes
- 2
- Views
- 103
- Remixes
- 0
- Comments
- 0
Files 1 1.3 MB
- Grip_body_with_Keyhole_1775908337.stlSTL · 1.3 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #295547
- Category
- Thể Thao & Ngoài Trời
- Published
Description
I added a couple small holes to attach a chain with a charm to a Nerf blaster for customization. Thank you Sillybutts for a great blaster!
Required Hardware:
-
1x M3 Nut
-
1x M3x25 Bolt
Printing Notes:
I used 5 walls of 0.3mm thickness and 25% infill, but use your own judgement based on your needs andd your machine.
Instructions:
-
From the bottom of the grip, add the M3 nut into the small rectangular hole. Mine was a tight fit, and I used a small flathead screwdriver and a hammer to gently convince the nut to move down to the bottom until i can see the full opening from the round side window. If your fit is not tight, you may use a very small amount of glue as not to impact the threads.
-
Insert your M3x25 bolt into the round hole and screw it about halfway through the large rectangular window.
-
Hook your charm onto the bolt using a clasp or a small keyring.
-
Gently continue screwing the bolt into the nut until you feel a slight resistance. The bolt should be sunken into the round hole enough not to feel it when holding the grip.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 1.3 MB
- Largest file
- 1.3 MB
0 comments
You may also like 12 models
See all-

-
New -

-

-

-

-

-

-

-

-

-


