Chốt khóa an toàn cho cửa tủ quần áo lùa

This is a print-in-place built-in robe door lock.  There is the locking mechanism that unfolds into a right angled blocker, and a base.  The base allows the mechanism to be attached to the door with double sided tape.  I printed this with PETG and glued together with Plumma's Type P clear PVC glue.  You need to used supports for printing due to latching mechanism (over hangs).  Also you need a 3.2mm pin to engage the latch.  I used some concrete nails (exactly 3.2mm diameter) to make the pins.