Lọ đựng muối/tiêu hình cừu dễ thương

It is a salt/pepper shader formed as a sheep. It is hollowed to be filled with salt or pepper, which can be poured of the nose.

I've printed a pig salt shaker for my brother and now it gets a sheepy pepper counterpart :)

Unfortunately the tail isn't a screw-cap, it didn't work on my printer due too low resolution, so I decided to make a tight cork, which needs some sanding after the print to fit.

It printed well with 0.3mm layer and 0.5mm nozzle. It needed no support.

The refill hole needs sanding for the cork to fit tight.