Ngàm gắn Cartographer V4 cho K2 Plus

Print Settings:

Same as Original.

Better to print in ABS / ASA.

Changes needed in the k2-improvements configs:

Edit cartographer.cfg file:

[cartographer]

mcu: cartographer

x_offset: 0

y_offset: -30

And:

[bed_mesh]

zero_reference_position: 175, 175

speed: 200

mesh_min: 10, 5

mesh_max: 340, 315

probe_count: 31, 31

mesh_pps: 0, 0

adaptive_margin: 10

fade_start: 5.0

fade_end: 50.0

bicubic_tension: 0.2

algorithm: bicubic

horizontal_move_z: 3

split_delta_z: 0.01

move_check_distance: 3

The mount need same screws as the original Model (PT M2.6 x 20 - Screws for plastic).