M.2 bridge 2242 sang 2280

I needed an adapter to install a Hailo 8 AI Edge processor onto a Raspberry PI5 M.2 hat. 
I didn't like any of the existing solutions I found, so I made my own. It will probably have some pros and cons to others that are already available.

Required hardware

This one needs an M.2 heat set insert (M2x4), so you can secure everything with screws.

I used https://www.ruthex.de/en/products/ruthex-gewindeeinsatz-m2-70-stuck-rx-m2x4-messing-gewindebuchsen 

I made it in a way that it's quite rigid, so far no vibrations could make it come loose.

Printing

Printed this from PETG, I was able to do it without supports. 

Notes

You can see the following on these photos:

• The M.2 bridge itself

• Raspberry Pi 5

• Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe peryferal Board for Raspberry Pi 5

• Hailo 8 processor

• Crucial P3 Plus 1TB SSD