Miếng lót ly Kumiko Asanoha

💮 The Concept

This project revisits the traditional Japanese Asanoha (hemp leaf) pattern, often used in the art of Kumiko, to create functional and aesthetic coasters. Designed to be easy to print, this set brings a touch of geometric sophistication to any interior.

🛠 Included in this Model:

• Shape Variants: 3MF files for both Square and Round versions.

• Dedicated Holders: Two elegant holder models, perfectly fitted to accommodate 4 coasters each.

⚙ Recommended Print Settings

Here are the settings I used to achieve the best results:

Parameter

Recommended Value

Technical Note

Nozzle

0.4 mm

Standard.

Layer Height

0.2 mm

Good balance between speed and detail.

Infill

15% - Grid

10% may be sufficient.

Walls

Minimum 2

Use 3 to further improve strength.

Others

No supports, No skirt

Unless your build plate has adhesion issues, a Brim is not necessary.

https://www.patreon.com/cw/DSCMaker