Modular Storage - Bigger Mini Drawers Ultimate (Cập nhật 2/2025)

Update 2/1/2025: 

• new divider system with movable dividers
• print time and material usage reduction on the housings
• label holder in front of the drawer
• a slot in the magnet pocket to pop out the magnet using a screwdriver, if you accidentally swap polarity

This makes them more flexible, as you can print out the drawers and a number of dividers to fit your needs.

Label sizes approximately:
1x1: 40x13 mm

2x1: 92x13 mm

2x1: 39x38 mm

2x2: 90x38 mm

Frankly speaking, I don't know where did the slight differences come from, but I will investigate and correct them.

7/14/2017: added stoppers to the housings

7/10/2017: the family is growing :) added 1x2 and 2x2 sized sets. these have a slightly thicker walls.

6/5/2017: added mini tweezers which fit inside the drawers and can be helpful if you don't have your metal ones at hand ;) designing Tweezers was a part of the "Designing for 3D Printing in Fusion 360" course by Vladimir Mariano on Udemy: https://www.udemy.com/designing-for-3d-printing-with-fusion-360/ . I just scaled them down a bit ;)

6/5/2017: Initial upload

Description:

Mini Drawers Ultimate by zeropage scaled up about 150%.

Mini drawers ultimate were too small for me and plain scaling them up didn't work well so I designed a bigger version. They are scaled up about 150% in all axis.

Drawers and housings have magnet slots for 8x3 neodymium magnets.

These ARE NOT compatible with Mini Drawers Ultimate by zeropage, because dimensions differ slightly.

I'd really appreciate any feedback :)

Print instructions

Printer Brand: Prusa
Nozzle diameter: 0,4 mm
Layer height: 0.3 mm for most parts and 0.2 mm for dividers
Supports: No
Infill: 0%
Material: PETG for drawers + PLA for housings
Top/bottom solid layers: 3
Perimeters: 2

You will need a bit of CA glue to glue in the magnets to the drawers. Otherwise, they will be attracted to the back wall of the housing by the external magnet.

How I Designed This

Designed from scratch using Fusion 360 with zeropage's design as a sample.