Hyper Light Drifter mod cho Dummy 13

Fan-made models for HLD inspired me to try and turn them into a full action figure using Dummy.

I included only modded parts here, for everything else please use originals/included links - dummy13v1, blank chest, trigger finger hand.

Most pieces will require support and/or adhesion. Pieces oriented the way I printed them. SwordHandle and DroidPink include small supports bc they were easier to remove.

Sword is the only part that requires glue.

May have trouble with fitting Feet+Booster together!! Check tolerances, if all else fails - sand or resize. I had Booster printed out of PLA break, so preferably use ABS (as with general Dummy guidelines).

Droid doesn't have a base, I used long wire so it wouldn't be too visible in photos. But you do you.

For outfit: 

Skirt is simple trapeze x2 - including seam allowance, roughly 3cm top x 4.5cm height x 4.5cm  bottom + ribbon belt and stencil painted pattern.

Cape is three layers of washed cotton fabric with unraveled edges - roughly 10cm wide x 8.5cm tall, orange slightly bigger than red, collar is separate piece 3cm x 9cm folded in half, placed on top.

Edit: accidentally uploaded wrong versions of HelmVisor and DroidBlue, it's fixed now! Sorry about that >.>"