Vỏ xe Sugoi cho mô hình RC Truggy Cramer

Introduce your model, create build instructions and add print tips... OK!

Introduction

This another option for body of cramer RC truggy: 

Also, I created a small project for the lights using some WS2812 LEDs and a ESP32-S2 mini to control them.

Build Instructions

 Hardware used:

• Front lights: 2x M3x20 screws / 2x M3 nuts

• Front bumper: 2x M3x25 screws / 2x M3 nuts

• Rear lights: 2x M3x16 screws / 2x M3 nuts

• Rear bumper: 2x M3x20 screws / 2x M3 nuts

• Locker button: 5.6 x 11 spring / M3x16 screw

• Spoiler: 4x M3x6 screws

The body was design to use the same screws from chassis, so perhaps you need some of them longer

You can find the project to flash in a ESP32 MCU in this repository: https://github.com/JulioSugaya/sugoi-rc-lights-v1

The LEDs used in this projects are WS2812 8 channels which I put 2 for each light, you can solder 2 in sequence and use them as 16 channels.

WS2812 LEDs: https://nl.aliexpress.com/item/32768344651.html?spm=a2g0o.order_list.order_list_main.20.76541802hlmPpa&gatewayAdapt=glo2nld

ESP32-S2 Mini: https://www.google.com/aclk?sa=L&ai=DChsSEwjl4JqRrciTAxVD_HkEHeIDFBYYACICCAEQEBoCd2Y&co=1&ase=2&gclid=CjwKCAjwvqjOBhAGEiwAngeQnXFV-OCN19ENpJ58dSQHMh_rQ7gNVex29p-kaAVycGfcly2PdvH4SRoCul8QAvD_BwE&cid=CAASJeRo1rDSdo4rp8WzZPYBV5Be2cLHY93-AN6Bbf1WWXY8JvS4Jok&cce=2&category=acrcp_v1_32&sig=AOD64_3TTU37TX1M7s0fXR0plWn61GnE9A&ctype=5&q=&nis=4&ved=2ahUKEwip6pGRrciTAxVQRf4FHTyKA_EQ9aACKAB6BAgIECQ&adurl=

Btw, there is a little case to fix this ESP32 in the chassis among the model files.

Print Tips

Here below there some advice which worked for me.

Model

Filament

Support?

Raft?

cramer_sugoi_body-botton

PLA

Yes

Yes

cramer_sugoi_body-top

PLA

Yes

Yes

cramer_sugoi_body-front

PLA

Yes

No

cramer_sugoi_body-rear

PLA

Yes

No

cramer_sugoi_body-spoiler

PLA

No

Yes

cramer_sugoi_front_bumper

TPU

No

No

cramer_sugoi_rear_bumper

TPU

No

No

cramer_sugoi_front_lights

PETG

Yes

No

cramer_sugoi_front_lights_glass

TransparentPETG

Yes

No

cramer_sugoi_rear_light

PETG

Yes

No

cramer_sugoi_rear_light_glass

TransparentPETG

Yes

No

cramer_sugoi_body-esp32-box

PLA

No

No