Bộ Kẹp PCB Cho Máy CNC 3018

Just a couple of improvements to make the original model a bit nicer to use, most importantly more clearance on the M3 bolt hole and using threaded heat-set inserts instead of an M3 nut, to prevent the upper clamp from ever being stuck to either the threads of the bolt or the clamp not opening because the (replaced) M3 nut spins freely.

You'll need:

• 4 * M3x16 bolts

• 4 * M3x5x4 threaded heat-set inserts (Voron-style)

• 4 * M4 or M5x25 - same as original

• 4 * Vslot nuts - same as original