C3PO - Mô hình robot lắp ráp linh hoạt

Printed in normal 0.2 settings, with the beautiful Prusa Bronze filament.
Mandatory: 0.2 layer (designed for it), 04 noozle. No support (they are built-in),
no brim, except for the screws.
 

Print parts, remove supports 

• below ball joints and 
• in the back slit for knee, ankle and elbow (there is a small square part to pop out with the screw driver)

The body has ball joints with a pinch support around. Remove it with a pair of pliers: press on the 2 arms of the pinch, it will open the pinch, and remove it.
 

Insert legs and arms in the ball joints of the body.

Move the joints around until they are wobbling. Then insert the screws, and screw then to tighten the joints (not too much). You will need a small electronics screwdriver.
 

If these instructions are not clear enough, you can get more details here: https://www.printables.com/model/800035-ai-robot-fully-posable-easy-assembly

And that's it!

please LIKE, DOWNLOAD (it help me to gain prusa points). Show me you makes. You can also follow me or even (let's dream a little…) suscribe to my club.