Skip to main content
F3D
Overpowered Heli Launcher - Máy phóng trực thăng cực mạnh 1

13 images

Đồ Chơi Ngoài Trời

Overpowered Heli Launcher - Máy phóng trực thăng cực mạnh

By laisch

Downloads
485
Likes
91
Views
3,103

Files 17 6.3 MB

  • Main_middle_1775202926.stlSTL · 257.4 KB
  • Lid_1775202927.stlSTL · 311.5 KB
  • Main_handle_1775202928.stlSTL · 1 MB
  • CounterPart_1775202930.stlSTL · 49.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Not another Heli launcher! But this one is different, it features an 1:9 gear System for full Power supportet by 608 ball bearings.

External Hardware:

Assembly

Press Bearing

Press a 608 bearing into the hole of the middle housing. This is a tight fit, so you can use a hammer or a vice. The bearing won't slip in all the way and is about 1mm proud

Heat Inserts

Put all the M3x6 heat inserts in to their holes

On the shaft heat insert it can happen that the molten material gets too proud. If the Shaft Assembly in the next step is too wobbly, sand this part if necessary.

Gear Assembly

Follow this guide step by step, otherwise you won't be able to get the "Counterpart in"

press the bearing into the 30 teeth gear on the 20/30 combination gear. Don't press the other bearing in yet

2. Add the shaft gear into the already pressed bearing

3. Add in the screw and the counterpart from the other side. It should be tight with no wobble. Sand if necessary

Assembled Shaft.

4. Now you can press the other bearing into the other side of the shaft assembly

5. Press the bearing into the 10/30 Gear

6. Put the two gears together like shown

7. Put the whole assembly into the midle box

8. While holding the gears in place, screw in the M3x10mm screw from the other side. This will widen the shaft and hold the Gears in place.

9. To make the gears last longer, you can add some lube

Final Assembly

Screw the remaining parts together and you are done!

Read more Show less

Print spec

Formats
stl
Model files
17
Total size
6.3 MB
Largest file
1 MB

0 comments

See all