Giá gắn đèn pin cho ray Nerf (Simple Nerf Rail Torch Mount)

Simple torch mount for Nerf Elite Rails

This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops.

This print is a simple (really simple) torch mount for Nerf Rails. Designed primarily for the cheap 9LED torches found in camping/hardware shops. Parts needed are:

• 2 or 3 Cable Ties
• M3 Bolt 25mm long
• M3 Nut
• Torch
• Nerf gun

How does it work?

The hole takes a M3 bolt through it and is designed to sit in the dips/divots on the Nerf Rail. This prevents the attachment from falling off. The 3 holes on the side are for cable ties to hold the torch in place.

Please note that this only works with Elite Rails and has only been tested on a Stryfe.

This is designed to print without supports upright, which also allows for the greatest strength for holding the torch.

What are the files?

There are 2 files with this, marked Tight and Loose. This is to take into account painted and unpainted Nerf guns. If you have a painted Nerf gun, select Loose. Unpainted takes Tight. I do not give any guarantees that it won't scratch off paint, use at your own risk. The differences are also marked on the model with a small 'T' or 'L' on one end.

Can I sell this?

Sure! Let me know how well it sells!