Skip to main content
F3D
Bộ nâng cấp ống giảm thanh Korsar 1

4 images

Thể Thao & Ngoài Trời

Bộ nâng cấp ống giảm thanh Korsar

By Kisolov_1652837

Downloads
150
Likes
20
Views
1,018

Files 4 6.8 MB

  • bushing_1775154541.stlSTL · 93.8 KB
  • one_26x10x7_1775154543.stlSTL · 1.4 MB
  • Cone_26x20x7_1775154543.stlSTL · 1.5 MB
  • Front_cover_1775154544.stlSTL · 3.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Remember that you make all the changes to the moderator's work and are responsible for all the dangers.

The moderator's inner chamber has a depth of 88mm. I used 4 cones of 10mm and 1 cone of 20mm with a sleeve length of 19 mm. The front cover has a 27x1 thread with a length of 10 m. If necessary, the sleeve can be cut by 1 mm.

I made a 7mm bore for the 22lr caliber. Yes, this is a lot, 6.5 or 6.3 is better, but for this you need the perfect alignment of the moderator.

It is possible to install a rubber flap in the front cover. But I didn't make the petal because I think it won't work in such a small volume. But you can try to manufacture and install the valve yourself.

I recommend printing with a 0.1mm layer, then the thread will be well suited to the original moderator. And also pay attention to the amount of plastic flow with excessive flow, defects may form, which negatively affects the quality and the ability to screw the lid into the moderator.

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
6.8 MB
Largest file
3.8 MB

0 comments

See all