Skip to main content
F3D
Hộp lưu trữ nam châm an toàn 1

1 image

DIY

Hộp lưu trữ nam châm an toàn

By MarioM

Downloads
2,064
Likes
1,309
Views
10,944

Files 16 21.9 MB

  • MagnetStorage_15mm-BUIS_1775124918.stlSTL · 938.9 KB
  • MagnetStorage_10mm-BUIS_1775124919.stlSTL · 673.2 KB
  • MagnetStorage_10mm-DOP_1775124920.stlSTL · 1.5 MB
  • MagnetStorage_12mm-DOP_1775124921.stlSTL · 1.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#281819
Category
DIY
Published

Description

This storage is meant for round magnets. At the screw cap the diameter is shown. Tip: if you put  the first magnet upside down in the tube, the other magnets will be pushed out a bit.

The print files are for diameters of 10, 12 and 15 mm. There is also a parametric FreeCAD file in which you can change the diameter, the length of the tube and the text on the cap. 

==================

Edit 2025-02-26
Threads tubes 6 and 8 mm refined.

Edit 2025-02-17
Made tubes 6 and 8 mm slightly bigger.

Edit 2025-02-10
Added tubes 6 and 8 mm.

Read more Show less

Print spec

Formats
bgcodefcstdstl
Model files
16
Total size
21.9 MB
Largest file
2.5 MB

0 comments

See all