Stealthburner Orbiter 2.0 FilamATrix kèm Orbiter Smart Sensor

Remix of Stealthburner-Orbiter 2.0 kèm Cảm biến Filament, Filametrix và CPAP By GrimmCustomCu_504731

By ScottBaron

Downloads: 226
Likes: 49
Views: 1,447
Remixes: 0
Comments: 0

Download all (.zip)· 8 files · 19.2 MB· 19.2 MB

Files 8 19.2 MB

Orbiter2-Front_1775101717.stlSTL · 1.8 MB
Orbiter2-Back_1775101719.stlSTL · 2.2 MB
revo_voron_front_v2_1775101721.stlSTL · 4.6 MB
revo_voron_rear_1775101722.stlSTL · 1.1 MB
Modified_Cable_Cover_1775101723.stlSTL · 209.6 KB
Offset_PG7_Mount_With_Slot_1775101724.stlSTL · 497 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #280970
Category: Máy In 3D
Published: 04/02/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike

Description

A mount for the Orbiter 2.0 extruder for the FilamAtrix toolhead cutter (note the A in mAtrix) recommended for the BoxTurtle MMU from Armored Turtle. I remixed the Stealthburner Orbiter 2 mod and the model for the Orbiter Smart Sensor for a filament runout detector or a MMU extruder endstop.

Also included is a slightly modified FilamAtrix hotend mount for the Revo Voron. The Orbiter 2 assembly interferes slightly with the blower fan in the Stealthburner, so the filament path was shifted back by 2mm.

Everything is printed in ASA with Voron print settings. Supports will be needed for the Orbiter2-Back assembly, other parts can be printed without supports. STLs are resized by +0.7% for ASA shrinkage and orientated to print.

The Orbiter Smart Sensor parts are all re-used as part of this assembly except for the housing.

Also included is a reinforced EBB36 mount and extended PG7 mount with a cutaway in the threads for easier removal of the CanBus cable when a connector is installed.