Skip to main content
F3D
Bộ sưu tập cây kiến trúc miễn phí #2 - Dáng tròn 1

4 images

Thế Giới - Mẫu Scan 3D

Bộ sưu tập cây kiến trúc miễn phí #2 - Dáng tròn

By citylab_lv_2966937

Downloads
245
Likes
27
Views
663

Files 17 13.6 MB

  • Bush_Basic_4_RND_1_1775090566.stlSTL · 60.1 KB
  • Bush_Basic_4_RND_3_1775090567.stlSTL · 151.3 KB
  • Bush_Basic_4_RND_2_1775090568.stlSTL · 105.1 KB
  • Tree_Basic_5_RND_1_1775090569.stlSTL · 241.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Use freely in your own architectural projects with attribution to Citylab.lv, or purchase a Commercial-Use License on my website.

(!) Print with the settings below. A small inaccuracy can lead to a failed print when printing trees and plants with overhangs. So most importantly - print with low speeds (but not too low), including travel, and minimize warping on overhangs, so keep cold air away from the print. Keep bed temp a little higher for some material softness if the trees have trunks, so it can bend a little without breaking. Use 0% infill and no supports.
(!) Changing scale not recommended
(!) Tested only on Core-XY printers (bedslingers not recommended)

For any feedback and inquiries contact me: [email protected]

________________________________________________________________________________

Settings for all BASIC Trees and Plant models by Citylab.lv

Printer type: FDM Core-XY
Material: PLA
Nozzle: 0.4mm

QUALITY (line width)
Default wall: 0.32
Innter wall: 0.42
Outer wall: 0.32
Top surface: 0.28
Internal solid infill: 0.32

Layer height: 0.2
Avoid crossing wall: True
Only one wall on top surfaces: Topmost surface
Seam position: Random
Wall transitioning threshold angle: 15
Wall generator: Classic
Order of walls: inner/outer

STRENGTH
Wall loops: 3
Bottom shell layers: 5
Bottom surface pattern: Concentric
Internal solid infill: Concentric
Top solid layers: 4
Top surface patterns: Concentric
Detect narrow internal solid infill: True
Ensure vertical shell thickness: True

INFILL
Sparse infill density: 0% (no infill)

SUPPORTS: False

SPEED
Bridge: 25
Gap infill: 90
Inner wall: 200
Internal solid infill: 125
Outer wall: 200
Small perimeters: 25
Top surface: 100
Travel speed: 250
(10%, 25%) (overhangs): 50
(25%, 50%): 25
(50%, 75%): 15
(75%, 100%): 5
over 100% wall (not bridge): 3

ACCELERATION
Normal printing: 2500
Outer wall: 1250
Inner wall: 0
Top surface: 500

FILAMENT SETTINGS (minimize cold airflow for less warping)
Part cooling fan: 100%
Auxilary part cooling fan: 20%
Exhaust fan: 0-10%

Bed temperature: ~50° for PLA softness

Read more Show less

Print spec

Formats
3mfstl
Model files
17
Total size
13.6 MB
Largest file
5.9 MB

0 comments

See all